---
title: "4.7.3 Biomechanics"
date: 2026-11-19
intro_image: "https://shibari-dojo.online/images/course/t473en_sq.webp"
fulltext_image: "https://shibari-dojo.online/images/course/t473en_lg.webp"
categories:
  - name: "Lesson 4.7"
    url: "https://shibari-dojo.online/en/course/module-4/lesson-7.md"
tags:
  - name: "Taijutsu (體術)"
    url: "https://shibari-dojo.online/en/tags/taijutsu"
---

# 4.7.3 Biomechanics

![4.7.3 Biomechanics](https://shibari-dojo.online/images/course/t473en_lg.webp)

Building a *futumomo* involves several important biomechanical issues if it is to be effective and fulfill its functions safely.

 Estimated reading time: 7 minutes.

 First, we need to understand a few simple concepts related to the biomechanics of the pelvis and the hip.

 
## Pelvis

 **The pelvis is our center of gravity, and at the same time it gives us great mobility through the hip joint**, the area where the femur fits into the hip bone.

 Because of this, our body has a whole set of flexor, extensor, adductor, and abductor muscles that, on the one hand, let us perform all those movements and, on the other, stabilize the pelvis so that we keep our balance and our weight is distributed optimally, where possible.

 However, as we mentioned earlier, our everyday postural habits do not usually reinforce our biomechanical design, and **we often move without the stabilizers taking an active part, relying on compensations instead.**

 This means that **the neural connections responsible for these movements will be weakened** and, in many cases, that our body will not know for sure what to do in the face of certain demands.

 It is not always a question of whether the muscles themselves are strong; rather, the **brain map** is what will not be optimal.

 For example, if we spend a lot of time sitting in chairs, we reinforce a position in which the hip flexors (above all the quadriceps, psoas, and iliopsoas) are contracted, while the posterior chain (above all the glutes and hamstrings) is lengthened but switched off, because it does not need to bear our weight; the chair takes care of that.

 
### Circular movement

 Throughout the course we have repeatedly stressed the importance of making **circular movements** at the body’s joints, and this is no exception.

 In general terms, this kind of movement consists of **stretching a little to create space, moving, stretching a little, moving, stretching a little, moving, fluidly and following a circle**, until we reach the desired position.

 This gives the body time to understand what we are asking of it and to gradually **initiate the movements** we are demanding, activating the muscles accordingly.

 If, on the other hand, we rush and simply **bring one part of the body toward another in a straight line**, the body will give us the movement but will use its weakest structure to do so. It understands that the muscles are not needed because “I’m being moved,” and under those conditions the easiest solution is to allow it using that structure.

 **Done this way, over time we reinforce our body’s weaknesses and, with them, increase the risk of injury both inside and outside the shibari session.**

 If the tied body has no tension at all, communication and stimulation become harder or disappear from the scene altogether; and even if we get the “posture” we wanted, it will come at the cost of creating compensations and concentrating the forces generated on the weak points of the tied person’s anatomy (knee, lower back…).

 With the *futumomo*, the problem arises because we take its name literally, which leads us to bring the foot to the buttock, joining one part of the body to the other.

 With the **hip in flexion**, it is very unlikely that the glutes and hamstrings will activate on their own in response to what we are asking of the body.

 Moreover, because of the way we bring the foot toward the buttock, part of the range of motion often comes from the knee joint, since we are pivoting on it. This brings several **problems**.

 The strongest muscles for bearing forces and weight are switched off. So if we move the person or place them in a position where that leg has to bear weight, the body will respond with compensations to give us the movement we ask for.

 Structures that were not designed for that work are likely to end up bearing those forces, which increases the **risk of injury**.

 In this case, the pelvis is often not in a stable position, which **makes optimal weight distribution even harder**.

 In addition, when we bring the foot to the buttock while the hip flexors are contracted, **we subject the knee joint to two opposing forces** that pull it apart.

 The quadriceps will try to draw it toward the chest, while we try to send it backward. This destabilizes the joint and puts **the tendons, ligaments, and other passive structures at risk of injury**, the very structures that form the joint and keep it intact, by overstretching them.

 **It is important to watch for any feeling of load or pain in the knee when we tie a *futumomo*, because it could be warning us that we are making a mistake and that the knee is compromised.**

 If, on the other hand, we have the right muscle configuration active when tying a *futumomo*, the one that stabilizes the pelvis and allows the hip to move, it will be easier for the movement to come from the right place, because **our brain will recognize that pattern as the optimal one** for the task we are asking of it.

 
## Don’t tighten on the shin

 **When we tighten, we do it on the soft parts, not the hard ones.**

 In the *futumomo*, this means **we tighten over the quadriceps, while over the shin we only maintain tension**.

 This is because soft parts usually correspond to larger, stronger muscle groups than those we find in hard parts, so they are better suited to bearing forces.

 In the case of the shin, moreover, the sensory nerve lies very close to the surface for evolutionary reasons, so unnecessary pressure from the ropes can cause a lot of pain.

 And let’s remember: our brain tends to switch off muscles in the presence of pain.
